Keeping Pool Bugs at Bay - Pool Shop | Pool Supplies | Spa Supplies | Pool Cleaning | Redbank Plains | Ipswich | Brisbane

Keeping Pool Bugs at Bay


If you want to maintain a healthy swimming environment for you and your family, you will need to ensure that the water quality of the pool is good. Part of this is to ensure that the pH balance of the pool is maintained. Without regular testing, all the pool equipment and chemicals in the world will be useless.

Whether you use chlorine to keep your pool clean or have a salt water pool, you will still need to conduct regular tests to ensure that bacteria and germs are kept to a minimum.

Start with the Basics

You will be able to get a basic water-testing kit from any pool shop, over the internet and most hardware stores. These include basic chemicals that allow you to check the pool’s pH level. The test gives you a basic idea of whether or not you are treating your pool properly.

Important Things to Consider

1) Cheap and nasty won’t do – get a test kit that is reliable.

2) Read the instructions properly and follow to the letter.

3) Check the kit’s information leaflet to establish whether or not your pool’s
pH is within normal levels.

Testing is Always Essential

Even if you are doing everything recommended in terms of pool chemicals, you need to conduct regular tests on the water. Catching pH problems early on can save you a lot of heartache.

Algae and bacteria are two of the problems that can result from unbalanced pool water. Once algae take hold, it can be difficult to eliminate. Bacteria can be more insidious – your family’s health could suffer before you discover the root cause.

How Often to Test

You should set up a regular testing schedule – see the test’s instructions for advice but generally once a fortnight is enough. In addition, you should check the water after a bad storm or if anything has been added to the pool. Rainfall can dilute the chemicals in the pool and introduce bacteria.

Pools should also be tested more often in summer when you are using them more. It is also important to check the pool more often when the weather is sunny because algae thrive in sunny weather.

Sorting out Problems

You will know what to do when you get the results of your pool tests. If the pH level is too high, you may need to add more chlorine or salt as high pH levels are conducive to the spread of bacteria. pH levels that are too low may indicate unsafely high levels of chemicals – steer clear of the pool until they normalise.

On the whole, it is important to use your own common sense. Rather add fewer chemicals and gradually increase the amount instead of throwing everything at the pool. Check your pool often and you and your family can be assured of a safe and comfortable swim all year round. Click here for more information.